Under Windows 2000
, XP and later OS, while user intends to install OS on the disk attached
on the RAID controller, they have to prepare a floppy driver disk including the
pre-OS installation files and press “F
The driver disk files had been
prepared in this package. Please follow the steps to prepare it.
1.
Make
sure the target system is already install floppy drive
2.
Prepare
a empty and valid floppy disk
3.
Copy
all files after extracted from the downloaded zip file to the floppy diskette without
losing
4.
Power
on the target machine and boot from the Boot CD. And press “F
5.
After
the booting process ask you to insert the floppy disk, please insert the
prepared floppy disk to the floppy drive and press enter
6.
Choose
the proper item to fit the OS and RAID controller you are installing. Each item
shows the matched OS for it.